800W 63Hz Stainless Steel Fiber Laser Machine Marking 150 M/Min For Glass

Stainless Steel Support Structure for Plastic/Metal/Glass Laser Marking Machine

* The quantity of characters printed each second and production line speed depends on the surface material and marking content.

Advantages of fiber laser marking machine performance

The fiber laser marking machine has high marking precision, does not need to touch the surface of the processed article. The the marking is durable and not easy to rub, the processing efficiency is high. And it has anti-counterfeiting characteristics. So its unique processing form provides more creativity for the current processing. These features are not possible with traditional silk screen printing and pad printing machines. Advantages of fiber laser marking machine performance.
However, the current silk screen printing and pad printing machines can display rich colors, which can achieve quickly by the adjustment of the ink. Below we will analyze the comprehensive performance of the laser marking machine from the speed, efficiency, use degree, operation difficulty, safety hazard, product demand . And other aspects is far superior to the traditional silk screen and pad printing machine.

Speed

Since the laser is processed directly using a high-energy density laser beam. And unlike traditional silk screen printing and pad printing machines. Then the operation is cumbersome.

Effectiveness

Laser processing does not require consumables. It only needs to adjust the image file to process directly. There is no need to worry about whether the net is blocked or not. And whether the printed graphics will have a cross section.

Safety hazard

Since the screen printing machine and the pad printing machine need to consume consumables, it will cause environmental pollution and also cause certain harm to people’s health.

Market demand

Due to the high processing precision, smooth marking and wide application range, laser marking equipment is far more demanding than the current silk screen printing and pad printing machines. Therefore, the performance of the current fiber laser marking machine is much higher than that of the traditional silk screen printing and pad printing machine. It has broad application prospects in the future, especially with the continuous improvement of the current process requirements, the market of laser marking equipment will Further growth.

Maintenance

1. When the machine is not working, the marking machine and computer should be powered off.
2. When the machine is not working, cover the field lens to prevent dust from polluting the optical lens.
3. When the machine works, the circuit is in a high-voltage state. Non-professionals should not repair it when starting up, so as to avoid electric shock accidents.
4. In case of any failure of this machine, immediately cut off the power supply.
5. If the equipment is used for a long time, the dust in the air will be adsorbed on the lower end surface of the focusing mirror, and the light one will reduce the power of the laser and affect the marking effect. Heavy cause optical lenses to absorb heat and overheat so as to burst. When the marking effect is not good, carefully check whether the focusing mirror surface is contaminated.
6. If the surface of the focusing mirror is polluted, remove the focusing mirror and clean its lower end surface.
7. Special care should be taken when removing the focusing mirror, and care should be taken not to damage or fall; At the same time, do not touch the mirror surface of the focusing mirror with hands or other objects.
8. The cleaning method is to mix absolute ethyl alcohol (analytically pure) and ether (analytically pure) according to the ratio of 3:1, invade the mixed solution with a long fiber cotton swab or lens paper, and gently scrub the lower end surface of the focusing mirror, and replace the cotton swab or lens paper once every time one side is rubbed.
9. During the operation of the marking machine, the marking machine must not be moved to avoid damage to the machine.
10. Do not cover piles or put other articles on the marking machine, so as not to affect the heat dissipation effect of the machine.

Dikai's laser solutions offer flexible positioning using the beverage beam delivery for the smallest footprint on both conveyor and bottle table applications. Exceptional wavelength capabilities, flexible i-Tech scanhead, and unique mirror beam control underpins performance. Modular design enable simple integration into the challenging PET production lines.

High speed

Faster coding speed, up to 700 characters/s.

high quality

The new intelligent control algorithm provides high quality marking technology

high reliability
Enhanced anti-electromagnetic design ensures stable operation in harsh environment
Ease of integration
Compact independent design, can be better integrated into the existing production line
Compact size, can adapt to a variety of installation space