TIJ 2.5 Flatbed Inkjet Printer / Batch Code Printing Machine 2 Heads

Thermal inkjet printing technology generally uses an ink system mixed with water-based and oil-based dyes, which can obtain good printing quality whether it is used in domestic printers or commercial printers. By reducing the ink drop ejection area and integrating the circuit circulation technology, the ink drop volume of the inkjet printer adopting the thermal foaming inkjet printing technology in the future will be smaller, the frequency of ejecting ink drops will be higher, and richer harmonic colors and smoother mesh tone will be produced. Thermal foaming inkjet printing technology meets the basic requirements of high-speed printing, such as low operating frequency, high nozzle number and resolution of single printing, which can improve printing speed and printer efficiency. Integrated circuit technology can also continuously reduce printing cost.

In addition, because the ink cartridge and ink will generate pressure under the action of thermal bubbles, the print head using thermal foaming inkjet printing technology requires that the ink cartridge and nozzle form an integrated structure, and the print head should be updated at the same time when the ink cartridge is replaced, so that users do not have to worry about nozzle blockage. However, it also causes the cost of consumables to be relatively high.

Features

1. Seal the ink cartridge. No leakage and waste, pay more attention to cost control, so that customers can save the purchasing cost of consumables to a greater extent during use.

2. No solvent is needed. Compared with the traditional small character or large character inkjet printer, the cost generated in the use process is lower, which is more conducive to the printing and use of mass products.

3. The equipment does not need maintenance, and the maintenance and use costs are low. Around the use process, TIJ inkjet printer does not need common maintenance, only needs to replace the new ink cartridge when the ink cartridge is used up, which greatly reduces the difficulty of operation and use by customers, reduces the technical requirements for production line workers, and is simpler and more practical.

4. In terms of using consumables and inks, all series of models can be equipped with different types of inks, such as water-based and quick-drying, with various colors, including red, blue, white, black and yellow.

5. The structure is simple. It generally consists of three parts: the host, the power supply and the nozzles. It does not need filters or cleaning and maintenance. It can realize multi-head code spraying. It can support up to 24 nozzles to work at the same time, and can change other colors of ink at any time, such as black, yellow, red, blue and white.