Industrial Coding & Marking
| Parameter | DLC300 | DLC600 |
|---|---|---|
| Marking Laser Type | CO2 generator (imported, optional) | CO2 generator (imported, optional) |
| Marking Laser Wavelength | 10.6 μm (standard), 9.3 μm (optional) | 10.2 μm (optional) |
| Laser Power | 30 W | 60 W |
| Marking Range / Working Distance (mm) | 70×70/100, 110×110/150 | 140×140/200, 175×175/250 |
| Marking Speed | 8000 mm/s | 12000 mm/s |
| Input / Output | 2 inputs / 3 outputs, customizable | 2 inputs / 3 outputs, customizable |
| Dimensions | Laser head 708×172×167; control panel 252×168×36 | Laser head 868×172×167; control panel 252×168×36 |
| Interfaces | USB, Ethernet, RS232 | USB, Ethernet, RS232 |
1. Check the focusing lens on the laser head for contamination and clean it if necessary. 2. Inspect the laser body vents for visible dust or blockage, and keep at least 100 mm of clearance around them. 3. Clean the vents on both sides of the laser body to maintain airflow. 4. If an extraction unit is installed, replace the activated carbon filter.
| Cooling System | Air-cooled (intake clearance ≥10 cm) | Air-cooled (intake clearance ≥10 cm) |
| Power Supply | 100–240 V, 50/60 Hz | 100–240 V, 50/60 Hz |
| Power Consumption | 500 W | 600 W (optional) |
| Operating Temperature | 5–40 °C | 5–40 °C |
| Operating Humidity | 10%–90% (non-condensing) | 10%–90% (non-condensing) |
