Industrial Coding & Marking
Common safety information for laser coders and TTO printers, plus technology-specific requirements.
01 / Common
02 / TTO
Mechanical Safety
Never put hands into the printing or ribbon-drive working areas while the equipment is running; avoid pinching and crushing injuries.
Abnormal-Drive Protection
If an error signal causes unintended movement, the equipment must stop immediately; continued operation is prohibited.
Equipment Fixing
After installation, the equipment must be secured firmly; it must not shift, shake or tip over.
Protective Devices
Guards must be correctly installed during operation and must not be removed or bypassed.
Consumables
Use our original consumables; with third-party consumables we cannot guarantee operational safety or performance.
03 / Laser
Laser Risks
The laser beam and reflected light can damage the retina; never look directly at the beam or reflected spots. Marking generates high temperatures with burn and material-ignition risks. Do not modify the optical path, power or other safety parameters without authorization.
Protective Equipment
Wear dedicated laser safety glasses matched to the wavelength; use dust masks and other protection as required by the working conditions.
Beam-Path Protection
Guards and safety doors must not be removed, and safety interlocks must not be bypassed, to prevent laser leakage.
Fume Hazards
Processing produces fumes and dust; an exhaust and purification system must be installed.